|
Post by account_disabled on Oct 23, 2017 10:13:45 GMT
I have a weird situation that I can't seem to figure out. My receiver is a Pioneer Elite SC-55 with dual Hdmi outputs. One goes to the TV, and the other is connected to a Sony projector with a motorized screen. The issue is the receiver will not lock onto the source signal and projector will not give me an image unless the TV is powered up. I set all sources to output 1080p, turned off all Control settings, and set the receiver to output 1080p. Another by-product is I cannot watch a 3D movie on the projector until I change the receiver Hdmi output to the projector only. My TV is not 3D capable. Everything is connected via Hdmi My equipment is the following: Pioneer Elite BDP-62 Blu-ray Sony bdp6200 for Netflix Xbox 360 Wii U Pioneer Elite SC-55 receiver Sony Vpl-hw30 projector Sharp Aquos lc-60e78u (or something close) Any ideas? Please help. Thanks! I didn't find the right solution from the Internet. References www.avsforum.com/forum/168-hdmi-q-one-connector-world/2275202-hdmi-equipment-issue.htmlB2B Marketing
|
|